Edge AWD V6-3.5L (2009)
10. Connect the transmission fluid cooler tube fasteners to the radiator support.
11. Install the battery tray.
1. Install the 3 bolts.
-
Tighten to 10 Nm (89 lb-in).
2. Connect the wiring harness fasteners to the battery tray.
12. Install the battery.
13. Position the ACL assembly in place and install the bolt.
-
Tighten to 11 Nm (97 lb-in).
14. Tighten the ACL outlet pipe clamp at the TB.
-
Tighten to 5 Nm (44 lb-in).
