Edge AWD V6-3.5L (2009)
20. Remove the top transaxle support insulator bolts.
21. Remove the bottom transaxle support insulator bolts.
Installation
1. Install the bottom transaxle support insulator bolts.
-
Tighten to 55 Nm (41 lb-ft).
2. Install the top transaxle support insulator bolts.
-
Tighten to 55 Nm (41 lb-ft).
3. Tighten the battery tray support bracket bolts.
-
Tighten to 10 Nm (89 lb-in).