Edge AWD V6-3.5L (2009)
NOTE: Install the studbolts in the locations noted during disassembly.
Install the main control cover and loosely install the 14 bolts.
1. Bolt location
2. Studbolt location
10. Tighten the main control cover bolts in the sequence shown.
-
Tighten to 12 Nm (106 lb-in).
11. Position the transmission fluid cooler thermal bypass valve and transmission fluid cooler tube assembly in place and install the 2 transmission fluid
cooler tube bracket nuts.
-
Tighten to 9 Nm (80 lb-in).
12. Connect the transaxle electrical connector.
