Edge AWD V6-3.5L (2009)
10. Wipe the surface of the existing solenoid body strategy tag on top of the transaxle case clean and install the new solenoid body strategy tag
(supplied with the solenoid body service kit) over it.
11. Position the transmission fluid cooler thermal bypass valve and transmission fluid cooler tube assembly in place and install the 2 transmission fluid
cooler thermal bypass valve bracket nuts.
-
Tighten to 9 Nm (80 lb-in).
12. Connect the transaxle electrical connector.
13. Inspect the transmission fluid cooler tube backing ring and seal for damage and install a new backing ring or seal if necessary. Lubricate the
transmission fluid cooler tube seal with clean transmission fluid and install the backing ring and seal on the transmission fluid cooler tube.
