Edge AWD V6-3.5L (2009)
10. WARNING: Do not drive vehicle until the urethane adhesive seal has cured. Follow urethane adhesive manufacturer's curing directions.
Inadequate or incorrect curing of the urethane adhesive seal will adversely affect glass retention. Failure to follow these instructions may
result in serious injury to vehicle occupant(s).
NOTICE: Before positioning the rear quarter glass, open vehicle windows to prevent the air pressure of closing doors from affecting the
urethane adhesive bond.
Install the rear quarter glass on the vehicle aligning it with the markings made previously.
11. NOTE: The urethane adhesive must cure for a minimum of one hour before testing for air or water leaks.
After the urethane adhesive has cured, check the rear quarter window glass seal for air or water leaks through the urethane adhesive bead and add
urethane adhesive as necessary.
12. Install the C-pillar, D-pillar and rear quarter trim panels.
