Edge AWD V6-3.5L (2009)
Wiper Motor: Service and Repair
Wiper Motor - Rear Window
Wiper Motor - Rear Window
Removal
1. Remove the rear wiper pivot arm. For additional information, refer to Wiper Pivot Arm - Rear See: Wiper Arm/Service and Repair/Wiper Pivot
Arm - Rear.
2. Remove the liftgate trim panel.
3. Disconnect the rear wiper motor electrical connector.
4. Remove the 3 rear wiper motor screws.
5. Remove the rear wiper motor.
Installation
1. Position the rear wiper motor on the liftgate and install the 3 rear wiper motor screws.
-
Tighten to 11 Nm (97 lb-in).
2. Connect the rear wiper motor electrical connector.
3. Install the liftgate trim panel.
4. Install the rear wiper pivot arm. For additional information, refer to Wiper Pivot Arm - Rear See: Wiper Arm/Service and Repair/Wiper Pivot
Arm - Rear.