Edge FWD V6-3.5L (2007)
19. Through the glove compartment opening, remove the screw and the RH duct assembly.
20. Remove the 4 bolts and the passenger air bag module support bracket.
21. Remove the 3 nuts from the passenger air bag module.
22. CAUTION: Do not allow the passenger air bag module to hang from the wiring harness. Damage to the wiring harness and connectors
may occur.
Lower the rear of the passenger air bag module off the 3 mounting studs. Move the passenger air bag module rearward to release the 7 hooks from
the I/P and rest the module on the cross vehicle beam.
