ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Vehicle Lifting|Description and Operation|Page 1810 > < Wheel Fastener|Front|Page 1806
Page 1
background image

Vehicle Lifting: Description and Operation

JACKING

WARNING:

-

Do not run the engine when jacking the vehicle. The wheels contacting the ground could cause the vehicle to move. Failure to follow these
instructions may result in personal injury.

-

Make sure the jack and jack stands are correctly located to prevent the vehicle from falling. Failure to follow these instructions may
result in personal injury.

-

Wheel chocks should be used to prevent the vehicle from rolling and falling off the jack. Failure to follow these instructions may result in
personal injury.

CAUTION:  The service jack provided with the vehicle is only intended to be used in an emergency for changing a deflated tire. Never use the
service jack to hoist the vehicle for any other service. Refer to the Owner Guide when using the jack supplied with the vehicle.

Jacking Points - Front

1. The front jacking points are identified by an upside down triangle on the rocker panel moulding just behind the front wheels. Position the jack so

its lift area fits on the frame underneath the triangle.

Jacking Points - Rear

1. The rear jacking points are identified by an upside down triangle on the rocker panel moulding just in front of the rear wheels. Position the jack so

its lift area fits on the frame underneath the triangle.

LIFTING

Lifting Points

Vehicle Lifting|Description and Operation|Page 1810 > < Wheel Fastener|Front|Page 1806