Edge FWD V6-3.5L (2007)
5. Connect the TR sensor electrical connector.
1
Connect the electrical connector.
2
Slide the locking tab over.
6. Connect the TSS sensor electrical connector.
7. Inspect the transaxle main control cover seal for damage and install new if necessary.
8. CAUTION: Inspect the 20 pin solenoid body connector seal to make sure that the seals is on the inside of the main control cover.
Transmission fluid leak will occur.
NOTE: Install the stud bolts in the locations noted during disassembly.
Install the transaxle main control cover and install the 14 bolts.
1
Bolt location
2
Studbolt location
