Edge FWD V6-3.5L (2007)
All vehicles
6. Remove the 4 bolts and the wheel bearing and wheel hub.
^
Discard the bolts.
Installation
All vehicles
1. Install the wheel bearing and new wheel hub bolts.
^
Tighten to 133 Nm (98 ft. lbs).
2. Position the brake caliper and anchor plate assembly and install the 2 bolts.
^
To install, tighten to 55 Nm (41 ft. lbs).
3. Install the brake disc.
AWD vehicles
4. Using a suitable installation tool, install the halfshaft into the wheel bearing and wheel hub.
5. Install the halfshaft hub nut.
^
Tighten to 275 Nm (203 ft. lbs).
