Edge FWD V6-3.5L (2007)
13. Remove the battery. For additional information, refer to Battery.
14. Remove the battery tray.
1
Disconnect the wiring harness fasteners.
2
Remove the 3 bolts and the battery tray.
15. CAUTION: The special tool must be carefully aligned to the mounting bosses on the oil pan. Failure to follow these instructions may
result in damage to the oil pan.
NOTE: The special tool and floor jack are used to raise and lower the engine to access the engine front cover and engine mount bracket fasteners.
Position a floor jack and the special tool under the oil pan and raise the floor jack high enough to release the pressure on the transaxle support
insulator.
16. Remove the transaxle support insulator through bolt.
