Edge FWD V6-3.7L (2011)
4. NOTE:
-
Make sure the arrow on the special tool is visible on the bottom and facing away from the subframe. The arrow must remain straight so that the
bushings are correctly indexed into the subframe.
-
When installing the RDU bushing, 204-617/2 will fall away as the RDU bushing is installed into the subframe. The Rear Drive Unit (RDU)
Bushing Remover/Installer does not control the depth of the bushing, continue to tighten the nut until the RDU bushing is fully seated into the
subframe.
-
For subframe revision 8T43-5K067-BA, the RDU bushing must be inset 2 mm (0.08 in).
Install the RDU bushing into the subframe.
5. Install the RDU.
