Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Rear Bumper Cover / Fascia: Service and Repair
REAR BUMPER COVER
Removal and Installation
1. Remove the six rear splash shield bolts (three each side).
2. Remove the two rear bumper cover to rear quarter panel screws (one each side).
3. Remove the four pin-type retainers.
4. Remove the rear bumper cover.
1
Remove the screws.
2
Remove the bolts and the liftgate alignment bumpers.
3
Remove the rear bumper cover.