Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
1
Remove the pin-type retainers.
2
Remove the front door scuff plate trim panel.
6. Remove the rear door scuff plate trim panel.
1
Remove the pin-type retainers.
2
Remove the rear door scuff plate trim panel.
7. Remove the lower B-pillar trim panel.
8. To install, reverse the removal procedure.
C-Pillar Trim Panel
C-PILLAR TRIM PANEL
Removal and Installation
LH side
1. If equipped with a power point on the LH quarter trim panel, disconnect the battery ground cable.
Both sides
2. Remove the safety belt D-ring cover.