Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Trunk / Liftgate Lock Cylinder: Service and Repair
REMOVAL
NOTE: Individual lock cylinders are repaired by discarding the inoperative cylinder and building a new lock cylinder using the appropriate lock repair
package. The lock repair package includes a detailed instruction sheet to build the new lock cylinder to the current key code of the vehicle.
1. Remove the liftgate trim panel.
2. Remove the liftgate lock cylinder.
1
Disconnect the actuating rod.
2
Remove the nuts.
3
Remove the lock cylinder.
INSTALLATION
1. To install, reverse the removal procedure.