Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
15. Disconnect the passenger air bag module electrical connector.
16. Connect the special tool to the instrument panel harness side of the passenger air bag module electrical connector.
17. Connect the battery ground cable.
18. Prove out the air bag system.
19. Remove the seat track to floor nuts.
20. Position the passenger seat rearward.
21. Remove the passenger seat.
1
Remove the seat track to floor bolts.
2
Remove the passenger seat.
CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a sent not secured in the vehicle may result
in damaged components.
