Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
26. If equipped, remove the under seat storage bin.
27. Remove the front seat cushion pan.
1
Remove the bolts.
2
Remove the front seat cushion pan.
28. Remove the seat adjuster.
^
Unclip the seat adjuster pins.
29. Remove the safety belt pretensioner.
1
Remove the bolt.
2
Remove the safety belt pretensioner.
NOTE: Note the routing of the wiring harness for installation.
INSTALLATION
WARNING:
^
ALWAYS WEAR SAFETY GLASSES WHEN REPAIRING AN AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) VEHICLE
AND WHEN HANDLING AN AIR BAG MODULE. THIS WILL REDUCE THE RISK OF INJURY IN THE EVENT OF AN
ACCIDENTAL DEPLOYMENT.
^
CARRY A LIVE SIDE AIR BAG MODULE WITH THE AIR BAG AND TEAR SEAM POINTED AWAY FROM YOUR BODY. THIS
WILL REDUCE THE RISK OF INJURY IN THE EVENT OF AN ACCIDENTAL DEPLOYMENT.
^
DO NOT SET A LIVE SIDE AIR BAG MODULE DOWN ON THE COVER TEAR SEAM. THIS WILL REDUCE THE RISK OF
INJURY IN THE EVENT OF AN ACCIDENTAL DEPLOYMENT.
^
AFTER DEPLOYMENT, THE AIR BAG SURFACE CAN CONTAIN DEPOSITS OF SODIUM HYDROXIDE, A PRODUCT OF THE
GAS GENERANT COMBUSTION THAT IS IRRITATING TO THE SKIN. WASH YOUR HANDS WITH SOAP AND WATER
