Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Cruise Control Servo Cable: Service and Repair
REMOVAL
1. Disconnect the speed control cable from the throttle control linkage and bracket.
2. Release the speed control cable cap.
1
Depress the speed control cable cap retaining tab.
2
Rotate the speed control cable cap.
3. Remove the speed control cable.
1
Depress the spring retainer.
2
Slide the core wire end out of the speed control servo pulley and remove the speed control cable.
INSTALLATION
1. To install, reverse the removal procedure.