Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Camshaft: Service and Repair
NOTE:Ford does not provide camshaft gear timing marks, or information to perform timing belt service without the special tools shown
in this procedure.
Removal
1. Remove the camshaft timing sprockets.
2. Verify the valve clearance.
3. CAUTION: Cylinder head camshaft journal caps are numbered on the outside flats to make sure that they are assembled in their original
positions. Failure to do so may result in engine damage.
Remove the camshafts.
^
Loosen the camshaft journal cap bolts in several two-turn passes in the sequence shown.
^
Remove the bolts.
^
Remove the caps.
4. Inspect the camshafts for wear.
^
Discard the oil seals.
Installation