Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Lifter / Lash Adjuster: Service and Repair
Removal
1. Remove the camshafts.
2. CAUTION: If the camshaft and valve tappets are to be reused, mark the location of the valve tappets to make sure that they are assembled in
their original positions.
Remove the valve tappets from the cylinder head.
3. Inspect the valve tappets.
4. NOTE: Make sure the valve tappets are installed in their original locations.
To install, reverse the removal procedure.
^
Lubricate the valve tappet with Super Premium SAE 5W-20 Motor Oil or equivalent meeting Ford specification WSS-M2C153-H.
