Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Remove the intake manifold.
^
Remove the two nuts and five bolts in the sequence shown.
13. Remove and inspect the intake manifold gaskets.
^
Discard if damaged.
Installation
1. NOTE: Illustration shown with the throttle body removed for clarity.
NOTE: Install new intake manifold gaskets if damaged.
Install the intake manifold and tighten using the sequence shown.
2. Install the generator.
3. Raise the vehicle.
4. Connect the KS electrical connector
5. Lower the vehicle.
