Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Exhaust Manifold: Service and Repair
Removal
1. Remove the catalytic converter.
2. Lower the vehicle.
3. Remove the oil level indicator and tube bracket bolt.
4. CAUTION: Do not work on the aluminum engine components until the engine is cold or damage may occur.
Remove the six bolts and three nuts and remove the exhaust manifold.
^
Discard the gasket.
Installation
1. CAUTION: The exhaust manifold sealing surfaces are soft metals. Do not use abrasive grinding discs to remove gasket material; use only plastic
manual scrapers. Do not scratch or gouge the aluminum sealing surfaces.
Carefully clean both sealing surfaces.
^
Position a new gasket.
2. Install the exhaust manifold and tighten using the sequence shown.
