Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Condenser HVAC: Service and Repair
REMOVAL
NOTE:
^
Installation of a new suction accumulator is not necessary when repairing the air conditioning system except when there is physical evidence of
system contamination from a failed A/C compressor or damage to the suction accumulator.
^
If an A/C condenser core leak is suspected, the A/C condenser core must be leak tested before it is removed from the vehicle.
1. Perform the Refrigerant Discharging and Recovery Procedure.
2. Remove the front bumper cover.
3. Remove the nuts from the two condenser core air conditioning line (peanut) fittings.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
4. Remove the screws and the A/C condenser core brackets.
5. Remove the A/C condenser core.
NOTE: When removing the A/C condenser core, disconnect the two air conditioning line (peanut) fittings from the A/C condenser core.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the new A/C condenser core with the correct amount of PAG Compressor Oil YN-12-C or equivalent meeting Ford specification
WSH-M1C231-B. See: Refrigerant Oil Addition.
^
Lubricate the O-ring seals with PAG Compressor Oil YN-12-C or equivalent meeting Ford specification WSH-M1C231-B.
