Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Hose/Line HVAC: Service and Repair
REMOVAL
1. Remove the A/C pressure cut-off switch.
2. Remove the evaporator core orifice.
3. Disconnect the condenser to evaporator line from the A/C evaporator core.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
4. Remove the front bumper cover.
5. Remove the nut and disconnect the condenser to evaporator line from the A/C condenser core and remove the condenser to evaporator line.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the O-ring seals with PAG Compressor Oil YN-12-C or equivalent meeting Ford specification WSH-M1C231-B.