Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
EGR Valve: Service and Repair
REMOVAL
1. Remove and discard the exhaust manifold to EGR valve tube.
2. Remove the air cleaner outlet pipe.
3. Remove the EGR valve.
1
Disconnect the vacuum line.
2
Remove the bolts.
CAUTION: When the EGR tube is disconnected from the EGR valve a new EGR tube must be installed. The aluminum threads on the EGR
valve must be inspected and a new EGR valve installed if the threads are damaged.
INSTALLATION
1. To install, reverse the removal procedure.
^
Carefully clean all sealing surfaces and install a new EGR valve gasket.
NOTE: The EGR valve sealing surfaces are soft metals.