Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Oil Separator: Service and Repair
REMOVAL
1. Remove the three way catalytic convertor.
2. Remove the crankcase vent oil separator.
1
Disconnect the Positive Crankcase Ventilation (PCV) valve.
2
Remove the bolts and remove the separator.
INSTALLATION
1. To install, reverse the removal procedure.
^
Carefully clean all sealing surfaces and install a new crankcase vent oil separator gasket.
NOTE: The oil separator sealing surfaces are soft metal.