Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
10. Disconnect the passenger safety belt buckle pretensioner electrical connector.
1
Remove the passenger safety belt buckle pretensioner electrical connector from the bracket under the seat.
2
Push to release the passenger safety belt buckle pretensioner electrical connector locking clip.
3
Disconnect the passenger safety belt buckle pretensioner electrical connector.
11. Attach the restraint system diagnostic tool to the passenger safety belt buckle pretensioner floor electrical connector.
12. Connect the battery ground cable.
13. With the restraint system diagnostic tools installed at all deployable devices, prove out the air bag system. See: Air Bag(s) Arming and
Disarming/Service and Repair/Prove Out Procedure
14. Disconnect the battery ground cable and wait at least one minute.
15. Remove the four passenger air bag module bolts.
16. Reaching one hand into the glove box opening, push outward on the passenger air bag module and remove it from the instrument panel.