Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
5. Attach the seat back trim cover J-retainers.
6. Install the manual lumbar control knob.
7. Install the seat backrest bolts.
1
Align the seat backrest to the seat bottom.
2
Install the seat backrest bolts.
CAUTION: When positioning the seat or installing the seat bottom to the seat back, be careful not to damage the seat back pivot or the recliner
mechanism. This can cause damage to the seat components.
8. Install the pivot nut.
9. Route the side air bag module wire harness as noted in removal. Install the wire harness and electrical connector pin-type retainers.
