Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Seat Belt: Service and Repair
Removal and Installation
Front Safety Belt and Retractor
Safety Belt Bolt Bit
SPECIAL TOOL(S)
REMOVAL
WARNING: ALL SAFETY BELT ASSEMBLIES INCLUDING RETRACTORS, BUCKLES, FRONT SEAT BELT BUCKLE SUPPORT
ASSEMBLIES (SLIDE BAR), SHOULDER BELT HEIGHT ADJUSTERS (IF SO EQUIPPED), CHILD SAFETY SEAT TETHER
ATTACHMENTS, AND ATTACHING HARDWARE SHOULD BE INSPECTED AFTER ANY COLLISION. ALL BELT ASSEMBLIES
SHOULD BE REPLACED UNLESS A QUALIFIED TECHNICIAN FINDS THE ASSEMBLIES SHOW NO DAMAGE AND OPERATE
PROPERLY. BELT ASSEMBLIES NOT IN USE DURING A COLLISION SHOULD ALSO BE INSPECTED AND REPLACED IF EITHER
DAMAGE OR IMPROPER OPERATION IS NOTED.
NOTE: The driver side is shown, the passenger side is similar.
1. Remove the B-pillar trim panel.
2. Remove the safety belt anchor.
1
Using the special tool, remove the bolt.
2
Remove the safety belt anchor.
3. Separate the front safety belt retractor from the B-pillar.
1
Remove the bolt.
2
Using the special tool, remove the bolt.
3
Separate the front safety belt retractor from the B-pillar.
