Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
1. Remove the rear door scuff plate.
1
Open the cover.
2
Remove the two pin-type retainers (one shown).
3
Remove the rear door scuff plate.
2. Separate the weather-stripping from the C-pillar.
3. Remove the safety belt anchor.
1
Using the special tool, remove the bolt.
2
Remove the safety belt anchor.
4. From behind the rear safety belt guide cover, release the retaining tabs, slide the cover up and remove it.
NOTE: The rear safety belt guide has been removed for clarity.