Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Bell Housing: Service and Repair
Clutch Housing Locating Dowels
Removal
1. Remove the flywheel.
2. NOTE: Care should be taken not to damage the dowel holes or the surrounding surface areas during removal.
Remove the clutch housing locating dowels.
Installation
1. NOTE: Care should be taken to install the dowel squarely into place until it is fully seated and to not damage the surrounding surface areas.
Install the clutch housing locating dowels.
2. Install the flywheel.