Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Windshield Washer Pump: Service and Repair
Rear Window Washer Pump
REMOVAL
1. Remove the RH front wheel and tire assembly.
2. Remove the RH front splash shield.
3. Remove the windshield washer pump.
1
Disconnect the electrical connector.
2
Disconnect the hose.
3
Remove the windshield washer pump.
WARNING: WINDSHIELD WASHER SOLUTION CONTAINS METHANOL, WHICH IS POISONOUS. OBSERVE ALL
CAUTIONS AND WARNINGS INDICATED ON THE LABEL OF THE WASHER SOLUTION CONTAINER. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
NOTE: To prevent spilling windshield washer fluid, drain the windshield washer reservoir before washer pump removal.
INSTALLATION
1. To install, reverse the removal procedure.
^
Fill the windshield washer reservoir with Ultra-Clear Windshield Washer Concentrate C9AZ-19550-AC or BC or equivalent meeting Ford
specification ESR-M17P5-A.
WARNING: WINDSHIELD WASHER SOLUTION CONTAINS METHANOL, WHICH IS POISONOUS. OBSERVE ALL
CAUTIONS AND WARNINGS INDICATED ON THE LABEL OF THE WASHER SOLUTION CONTAINER. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
CAUTION: Do not operate the windshield washer pump prior to filling the windshield washer reservoir.