Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Windshield Washer Pump: Service and Repair
Washer Pump and Reservoir
REMOVAL
1. Remove the right front wheel and tire assembly.
2. Remove the right front splash shield.
3. Position the windshield washer reservoir aside.
1
Remove the bolts.
2
Position the windshield washer reservoir aside.
WARNING: WINDSHIELD WASHER SOLUTION CONTAINS METHANOL, WHICH IS POISONOUS. OBSERVE ALL
CAUTIONS AND WARNINGS INDICATED ON THE LABEL OF THE WASHER SOLUTION CONTAINER. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
NOTE: To prevent spilling windshield washer fluid, drain the windshield washer reservoir before removal.
4. Remove the windshield washer reservoir.
1
Disconnect the electrical connectors.
2
Disconnect the hoses.
3
Remove the windshield washer reservoir.
INSTALLATION
1. To install, reverse the removal procedure.
^
Fill the windshield washer reservoir with Ultra-Clear Windshield Washer Concentrate C9AZ-19550-AC or BC or equivalent meeting Ford
specification ESR-M17P5-A.
WARNING: WINDSHIELD WASHER SOLUTION CONTAINS METHANOL, WHICH IS POISONOUS. OBSERVE ALL
CAUTIONS AND WARNINGS INDICATED ON THE LABEL OF THE WASHER SOLUTION CONTAINER. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
CAUTION: Do not operate the windshield washer pump prior to filling the windshield washer reservoir.
