Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
injury.
Remove the special tool to the instrument panel harness side of the passenger air bag module electrical connector.
21. Connect the passenger air bag module electrical connector.
22. Raise the glove compartment.
-
Press the locking tabs.
23. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from vehicle prior to road use. Failure to
remove could result in injury and possible violation of vehicle safety standards. Failure to follow these instructions may result in personal
injury.
Remove the special tool from the steering column harness side of the driver air bag module electrical connector.
24. Connect the driver air bag module electrical connector.