Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
Install the passenger seat.
1
Position the passenger seat.
2
Install the seat track to floor bolts.
-
If equipped with heated seats, connect the electrical connector.
5. Position the passenger seat forward.
6. Install the seat track to floor nuts.
7. Disconnect the battery ground cable and wait at least one minute.
Vehicles with side air bag
8. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from vehicle prior to road use. Failure to
remove may result in injury and possible violation of vehicle safety standards.
Remove the special tool from the passenger side air bag module body harness electrical connector.
9. Connect the passenger air bag module electrical connector.
All vehicles