Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
8. Install the inboard seat cushion side shield.
9. Install the outboard seat cushion side shield.
-
If equipped with a power/heated seat, connect the electrical connector.
1
Install the shield.
2
Install the screw.
3
Install the seat backrest handle.
10. If equipped, install the seat height adjustment control.
11. CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle
may result in damaged components.
Install the driver seat.
1
Position the driver seat.
2
Install the seat track to floor bolts.
