Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
Wheel Cylinder: Service and Repair
Removal and Installation
Wheel Cylinder
Removal and Installation
1. Remove the rear brake drum.
2. Using the Brake/Clutch/Service Vacuum, remove brake dust and dirt from the brake assemblies.
3. Remove the parking brake cable from the parking brake cable lever.
4. Remove the hold-down clips and pins.
5. Remove the lower spring.
6. Remove the rear brake shoes.
1
Pull the bottom of the brake shoe forward.