Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
6. Remove the primary and secondary piston.
7. NOTE: If the brake master cylinder bore is damaged a new brake master cylinder must be installed.
Use isopropyl alcohol to clean and inspect the brake master cylinder bore for damage.
Assembly
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.
1. Use clean brake fluid to lubricate the new piston assembly seals and the brake master cylinder bore.
2. Install the secondary piston assembly.
