Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
Valve Cover: Service and Repair
Valve Cover
Removal and Installation
1. Remove the air cleaner outlet pipe.
2. Remove the ignition wires from the spark plugs.
3. Disconnect the throttle cables.
^
Disconnect the speed control actuator cable (if equipped).
^
Disconnect the accelerator cable.
4. Disconnect the catalyst monitor and heated oxygen sensor electrical connectors. Detach the electrical connectors from the bracket.
5. Remove the wiring harness anchors from the valve cover studs and position the wiring harness aside.