Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
6. Remove the valve cover.
1
Remove the stud bolts
2
Remove the bolts.
7. CAUTION: The valve cover sealing surfaces are soft materials. Do not use abrasive grinding discs to remove gasket material; only use manual
scrapers. Do not scratch or gouge sealing surfaces or oil leaks may occur.
Clean and inspect the sealing surfaces of the valve cover and the cylinder head. Both surfaces must be clean and flat.
8. To install, reverse the removal procedure.
^
Install a new valve cover gasket if damaged.
