Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
Intake Manifold: Service and Repair
Intake Manifold
Removal
1. WARNING: Fuel supply lines will remain pressurized for long periods of time after engine shut down. This pressure must be relieved
before disconnecting any fuel lines or fuel system components to prevent possible injury. Failure to follow these instructions can result in
personal injury.
Remove the fuel injection supply manifold.
2. Disconnect the throttle position (TP) sensor electrical connector.
3. Disconnect the idle air control (IAC) electrical connector and unclip the harness from the bracket.
4. Disconnect the main engine control sensor wiring and remove the connector from the mounting bracket.