Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
24. Position the RH lower splash shield and install the bolts
25. WARNING: Whenever a wheel is installed, always remove any corrosion, dirt or foreign material present on the mounting surfaces of
the wheel or the wheel hub, brake drum or brake disc that contacts the wheel. Installing wheels without correct metal-to-metal contact at
the wheel mounting surfaces can cause the wheel nuts to loosen and the wheel to come off while the vehicle is in motion, causing loss of
control. Failure to follow these instructions can result in personal injury.
Clean the wheel hub mounting surface and the wheel pilot
26. Install the wheel and tire assembly
1
Position the wheel and tire assembly
2
Install the wheel nuts hand-tight
27. Remove the special tool.
28. Install the stud
29. Install the coolant tube.
30. Install the catalytic converter.