Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
31. CAUTION: Failure to tighten the wheel nuts in a star pattern can result in high brake disc runout, which will speed up the development of brake
roughness, shudder and vibration.
Tighten the wheel nuts in the sequence shown.
32. Install the center cap.
33. Remove the special tool.
34. Inspect the valve cover gasket. Install a new gasket, if necessary.
35. Position the valve cover.
1
Install the stud bolts.
2
Install the bolts.
36. Connect the wiring harness anchors to the valve cover studs.