Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
Intake Air Duct: Service and Repair
REMOVAL
1. Disconnect the air cleaner outlet pipe at the mass air flow sensor.
^
Unclip the throttle cable from the outlet pipe.
^
Loosen the screw clamp and disconnect the pipe.
2. Remove the outlet pipe.
1
Disconnect the outlet pipe from the throttle body.
2
Unclip the hose from the outlet pipe.
3
Disconnect the crankcase vent tube and remove the air cleaner outlet pipe.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: The air cleaner outlet pipe should be securely sealed to prevent unmetered air from entering the engine.
