Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
12. Disconnect the passenger side air bag module electrical connector.
1
Slide and release the passenger side air bag module electrical connector locking clip.
2
Disconnect the side air bag module electrical connector.
13. Attach the restraint system diagnostic tool to the passenger side air bag module floor electrical connector.
14. Disconnect the passenger safety belt buckle pretensioner electrical connector.
1
Remove the passenger safety belt buckle pretensioner electrical connector from the bracket under the seat.
2
Push to release the passenger safety belt buckle pretensioner electrical connector locking clip.
3
Disconnect the passenger safety belt buckle pretensioner electrical connector.
15. Attach the restraint system diagnostic tool to the passenger safety belt buckle pretensioner floor electrical connector.
16. Connect the battery ground cable.
17. With the restraint system diagnostic tools installed at all deployable devices, prove out the air bag system. See: Air Bag(s) Arming and
Disarming/Service and Repair/Prove Out Procedure
