Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
17. Connect the driver side air bag module electrical connector. Install the driver side air bag module electrical connector onto the bracket under the
seat.
18. Remove the restraint system diagnostic tool from the passenger safety belt buckle pretensioner floor electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
19. Connect the passenger safety belt buckle pretensioner electrical connector. Install the passenger safety belt buckle pretensioner electrical connector
onto the bracket under the seat.
20. Remove the restraint system diagnostic tool from the passenger side air bag module floor electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
