Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
12. Connect the driver air bag module electrical connector.
13. Install the steering wheel access cover.
14. Remove the restraint system diagnostic tool from the driver safety belt buckle pretensioner floor electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
15. Connect the driver safety belt buckle pretensioner electrical connector. Install the driver safety belt buckle pretensioner electrical connector onto
the bracket under the seat.
