Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
7. Apply two strips of masking tape across the clockspring to prevent accidental rotation when the clockspring is removed.
8. Separate the clockspring from the steering column.
1
Remove the screws.
2
Pull out and separate the clockspring from the steering column.
9. Remove the clockspring.
1
Disconnect the accessory electrical connector.
2
Push to release the clockspring electrical connector locking clip.
3
With the clockspring electrical connector locking clip in the released position, pull and disconnect the clockspring electrical connector.
4
Remove the clockspring.
10. Attach the restraint system diagnostic tool to the vehicle harness side of the clockspring electrical connector at the steering column.
INSTALLATION
WARNING: