Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
5. Attach the seat back trim cover J-retainers.
6. Install the manual lumbar control knob.
7. Install the seat backrest bolts.
1
Align the seat backrest to the seat bottom.
2
Install the seat backrest bolts.
CAUTION: When positioning the seat or installing the seat bottom to the seat back, be careful not to damage the seat back pivot or the recliner
mechanism. This can cause damage to the seat components.
8. Install the pivot nut.
