Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
13. Align the retaining clips and push inward, installing the inboard seat cushion side shield.
14. Install the affected seat into the vehicle.
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS,
NOTES AND INSTRUCTIONS IN THE SEAT REMOVAL AND INSTALLATION PROCEDURE.
CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle may result
in damaged components.
15. Connect the battery ground cable.
16. With all the restraint system diagnostic tools removed, prove out the air bag system. See: Air Bag(s) Arming and Disarming/Service and
Repair/Prove Out Procedure
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
17. Check the active restraint system for correct operation.
